
The SPEC Pak right angle plug has contacts for wire gauges #24 to #10 AWG (0.25 to 4 mm²) handle up to 45 amps. The line of plugs uses an industry standard panel mount cut outs. Touch-safe housings meet UL1977, Section 10.2.
A 6-position right angle plug is part of the SPEC Pak family of connectors. The Spec Pak (Sealed Power for Environmental Connections) features rugged and environmentally sealed IP68 shells and sealing components to protect power contacts. The flat wiping power contacts have decades of use and color-coded housings give users extensive options.
The configurable connector series now includes benefits such as shortened overall length off the panel and wire training. The Right angle Specification Pak features a low cost, right-angle backshell which can be oriented and locked to the plug shell allowing the cable to be routed in any of 8 different directions.
The Right Angle Plug is compatible with a range of discrete wire and jacketed cable diameters of up to 27 mm with six 10 AWG wires, or a mix of power and signal wire gauges with individual wires up to 10 AWG. The line of connectors is compatible with cost effective and industry standard PG sized glands that allow for a wide range of wire, cable and liquid tight conduit seals. The Right Angle Plug has two available backshells, one sized for PG 21 and other for PG 29 sealing glands.
A wide selection of color-coded power housings is available in standard and finger proof versions. Signal and ground housings with the standard Powerpole form, offer versatility and design flexibility.
Anderson Power Products
www.andersonpower.com
Filed Under: News