This project will represent a first for Siemens’ new SWT-7.0-154 direct-drive turbine including its 66-kV transformer, cable, and switchgear.
Nissum Bredning Vindmøllelaug and Jysk Energi placed the winning bid following a tender from Danish Energy Agency’s (DEA) for construction of “Nissum Bredning Vind,” a 28-MW pilot project in northern Denmark.
The final investment decision has been made for the project, which includes important tests for future offshore wind technology.
Siemens will supply its new 7-MW direct-drive wind turbine, as well as an innovative and cost-efficient gravity jacket foundation solution. Its new 66-kV voltage solution includes a new transformer, cable, and switchgear systems, and further innovations regarding tower and controller settings.
The commercial aspect of the offshore wind technology to be tested in the project is expected to show a significant positive impact on the Levelized Cost of Electricity. The DEA believes that the elements to be tested at Nissum Bredning will bring significant savings within capital and operating costs.
“We are proud to be part of Nissum Bredning Vind offshore wind power plant. Since the Danish Ministry of Energy tendered the project as an official test bed for new technologies and integrated design, we’ve looked forward to this exciting project,” says Michael Hannibal, CEO Offshore at Siemens Wind Power and Renewables Division. “This gives us the opportunity to simultaneously test and promote our innovations to achieve further cost reductions in offshore wind.”
A major contributor is Siemens’ innovative gravity jacket foundation concept, which provides for the construction of jacket foundations at lower costs than monopiles. Foundations generally account for approximately 20 to 30% of the costs of an offshore wind power project. Siemens will continue to run a series of projects out of its R&D functions in Brande and Vejle, Denmark, to lower the cost of energy from offshore wind.
The four Siemens SWT-7.0-154 wind turbines will be grid connected using a new cable and turbine concept with a 66-kV voltage. Siemens expects this to be the standard voltage for future offshore wind power plants. This higher voltage results in lower costs for cabling and lower losses.
Additionally, cable in pipe solutions allow for simpler cables to potentially be used between turbines. Further material savings will be provided by the slender tower concept using prototypes of a new lightweight turbine tower, especially suited for jacket foundations.
Nissum Bredning Vind offshore wind power plant will get support by receiving a guaranteed feed-in tariff of DKK 0.7/kWh (EUR 0.09/kWh) for the initial 10 years for the first 50,000 full load hours of operation. Turbine installation is scheduled for summer 2017. Commissioning will be in the third quarter of next year.
Filed Under: Cables & connectors, News, Offshore wind, Projects, Turbines
