Nordex SE will present the Delta Generation turbines N100/3300, N117/3000 and N131/3000 in its center stage at the international wind energy expo, WindEnergy Hamburg, held from September 23 to 26, 2014. The special highlight will be the 64.4-meter long rotor blade of the light wind turbine N131/3000 — one of the largest rotor blades for onshore turbines — which will be presented as an exhibit to the public for the first time.
On the yard of the Hamburg Messe, next to the TV Tower, visitors can also convince themselves of the performance capability of the second generation of rotor blade adapters by the TII group and gain first-hand wind energy and logistic know-how.
Thanks to the adapter, the large-dimensioned N131/3000 rotor blades can be transported along narrow curves and past obstacles. This allows the rotor blade to be transported in particular rough terrains. Collisions with obstacles such as trees or buildings can be avoided. Thus, the position of the rotor blade can be adjusted to the road with no loss of time, even on hillsides or serpentine roads. A wind sensor warns when the configurable wind speed is exceeded.
The new rotor blade adapter can be installed and operated on platform trailer combinations as well as self-propelled modules.
The N131/3000 turbine is designed for locations with light wind speeds. With a nominal output of 3.0 MW, its capacity is 25 percent greater than its predecessor’s. Thanks to the design optimization of the rotor blade, the sound power level could be reduced to 104.5 dB (A). The N131/3000 will be installed for the first time in the fourth quarter of 2014. Serial delivery of the system will start in 2015.
Nordex at WindEnergy Hamburg: Hall B6, booth no. 346
TII Group at WindEnergy Hamburg: Hall B2.EG / booth no. 213
Also read: Nordex awarded contract for 20 N117/2400 turbines from Turkey
Nordex
www.nordex-online.com
Filed Under: News, Turbines